5 Tips for Using Floor Sanders in Mornington Peninsula, VIC

May 2, 2025

If you’re a professional or DIY enthusiast looking for floor sanders in Mornington Peninsula, VIC, you know how important it is to achieve smooth, polished floors. Whether you're restoring old timber floors or preparing a new surface, using the right techniques can make a world of difference. 


5 Essential Tips to Help You Get the Most Out of Your Floor Sander


1. Choose the Right Floor Sander for the Job

When it comes to floor sanders, choosing the right type of sander for your project is key. There are different kinds of sanders designed for various tasks:


  • Belt Sanders: Ideal for large, flat surfaces and heavy-duty sanding, especially if you're working with rough or damaged floors.
  • Orbital Sanders: Best for finishing and fine sanding, leaving behind a smoother surface with fewer scratch marks.
  • Edge Sanders: Perfect for sanding the edges and corners that other sanders can't reach.


By selecting the right sander for your specific needs, you'll make the job easier and faster, with a superior outcome.


2. Prepare the Area Before Sanding

Preparation is key when using floor sanders. Before you begin, remove all furniture, rugs, and any obstacles from the area. Ensure the floor is free of nails or screws that could damage the sander. Check for cracks or other imperfections and repair them before sanding to prevent complications during the process.


3. Start with Coarse Grit Paper

When using floor sanders, it’s best to start with a coarse grit sandpaper to remove the old finish and smooth out rough patches. Typically, you’ll start with a 36- to 40-grit paper for the first sanding and gradually move to finer grits (60, 80, 100) as the floor becomes smoother.


Starting with a rougher grit ensures that you effectively remove imperfections, scratches, and the old finish. As you move to finer grits, hardwood floors will start to shine and feel smoother underfoot.


4. Move in the Right Direction

For the best results with floor sanders, always sand in the direction of the grain. Sanding against the grain can leave visible marks that are hard to fix. Keep a consistent speed when moving the sander, avoiding any jerky movements that could create uneven surfaces.


When using a drum sander, always keep it moving to avoid "digging" into the wood, which can result in gouges.


5. Clean the Floor Thoroughly

After sanding, it’s crucial to clean the floor properly before applying any finishes. Dust and debris left behind can affect the adhesion of stains or sealants. Use a vacuum to remove as much dust as possible, followed by a damp cloth to wipe down the surface.


Trust G.P. Hire (Vic) Pty Ltd for High-Quality Floor Sanders


Using floor sanders in Mornington Peninsula, VIC, can be a straightforward task when you follow the right techniques. From choosing the right sander and sandpaper grit to keeping the sander moving and applying even pressure, these tips will help you achieve a smooth and professional finish on your floors.


For those looking for reliable and affordable floor sanders in Mornington Peninsula, VIC, G.P. Hire (Vic) Pty Ltd offers a wide range of high-quality rental equipment. Our expert team is ready to assist with all your floor sanding needs. Visit or contact us today for top-notch service and tools to make your next project a success!